아연 도금 단면 프로파일 치수 표
You should be aware of the galvanized section profile dimensions if you want to use this metal in construction. Box profiles are commonly used in steel construction, facade cladding, and machinery manufacturing. The standard galvanized section profile size is 50 mm, but it can be customized to any size. The different dimensions of the section also vary with the amount of coating applied to it. For example, if you want to build a solar park structure, you can choose a 70mmx120mm deformed C-profile.
It is possible to have different section profile dimensions for different projects. The box profile is typically made from cold rolled sheet and is then galvanized. Another type of box profile is formed by bending a hot-rolled coil sheet with a roll form. This metal is then welded longitudinally to make a box-profile. This steel is then subsequently galvanized to make it more resistant to corrosion. The process is called “hot-dip galvanizing,” and the process is quite simple and straightforward.
The galvanizing process protects the metal against atmospheric corrosion and is often used in construction. It can be done by dipping the steel, which is the preferred method because it does not require any welding. The steel used for box-profile production is either cold-rolled or hot-rolled. The resulting box profile is then welded longitudinally. Because of the nature of the process, this metal is suitable for galvanizing.
There are several methods to galvanize steel, but the most common is dipping. The cold-rolled steel box profile, which is made from cold-rolled sheet, is subjected to a hot-dip galvanizing process. The process is also required for the box-profile. The box profile is formed by pressing a hot-rolled coil sheet on a roll form. The welded box profile is then welded longitudinally.
As mentioned, the zinc coating is passive in carbonated concrete, but it becomes vulnerable to the chloride from the air. This is why the galvanizing process is preferred over the unstressed steel. However, there are several risks associated with the galvanizing process. One of these is hydrogen embrittlement, which occurs when the steel is exposed to chlorides. In addition, the dipping process can oxidize the steel to a toxic level.
After galvanizing, the metal will retain its color and finish. Its surface is protected by a layer of zinc. During this process, the steel will become passive. This is the ideal condition for galvanized steel reinforcement. The metal will remain strong and durable, and it will resist corrosion. This protective layer also prevents corrosion. The steel will not rust and will be protected against the corrosive action of chlorine.
ㅏ 아연 도금 단면 프로파일 is a fabricated metal product that has been coated with a zinc layer. This protects the steel from atmospheric corrosion. Because it has a low coefficient of corrosion, it is a perfect choice for carbonated concrete. This is because the zinc coating is much more resistant to chloride compared to uncoated steel. In addition, the zinc coating is also a good choice for reinforced concrete.
Unlike uncoated steel, galvanized steel reinforcement is better suited for concrete that is at risk of carbonation. As a result, it is more resistant to carbonation than unstressed steel. As a result, galvanized steel reinforcement is more resistant to abrasion. In contrast, uncoated steel does not experience any of this problem. The only disadvantage is the lack of flexibility in the shape of the box profile.
그만큼 galvanized section profile has an improved resistance to carbonated concrete. Because the steel is galvanized, it is resistant to atmospheric corrosion. It also offers more corrosion protection than unstressed steel. Therefore, it is the best choice for concrete where there is a risk of carbonation. It is also ideal for cracked carbonated concrete. It has a longer life in carbonated concrete, and is resistant to water and salt.
Before a galvanized section is put to use, it must be properly protected from corrosion. The coating must be coated with a corrosion inhibitor, which prevents the reinforcing bar from becoming white. This is an important part of the process. After a galvanized section has been properly protected, it can be used to reinforce concrete. It is easy to cut and install, and it is often made of high-quality steel.